A fraction of the time

Hours, not weeks. No waiting on a contractor, nothing to dry, and the kitchen stays open while you work.

Half the work

No tear-out, no sanding, no primer. Clean the surface, peel the backing, press it on.

A fraction of the cost

New wood cabinets cost a small fortune. Wrap the ones you already own for a fraction of that.

How it works

4 easy steps.

If you can measure and cut a straight line, you can do this. Your first piece shows you everything you need for the rest.

  1. 01

    Clean

    Take off the hardware and wipe the surface with a degreaser. Smooth, dry and dust-free is all it needs.

  2. 02

    Measure & cut

    Add 2 inches on every side, then cut along the grid printed on the backing. Straight lines, no guesswork.

  3. 03

    Peel & press

    Peel back about an inch of backing, line up the film, and press from the center out with the squeegee. Peel the rest one side at a time.

  4. 04

    Warm & trim

    Warm the edges with a heat gun or hair dryer so it stretches, wrap it around, and trim the extra with a fresh blade.

Laying a sheet of light oak SurfaceWrap across a dining table Pressing wood-grain SurfaceWrap smooth with a squeegee
What you need

Everything fits in one bag.

  • SurfaceWrap vinyl woodin your design
  • Tape measureand a pencil
  • Straightedgefor straight cuts
  • Utility knifewith fresh snap-off blades
  • Felt-edge squeegeeto press it smooth
  • Scissorsfor rough cuts
  • Heat gun or hair dryerfor edges and corners
  • Degreaserand a clean cloth

No saws. No sanders. No paint trays.

Watch the how-to videos
One kitchen, before and after
This kitchen

The wood look, without the wood bill.

160 sq ft of wrapping: every cabinet, the pantry, the uppers and the fridge.

SurfaceWrapReal wood
Cost$1,342$14,000–$25,000
6 rolls of 4 × 8 ft, waste includedNew veneer cabinets, removal and disposal, new panel-ready fridge
FridgeWrapped to matchNew panel-ready fridge
TimeA weekend1–3 weeks or more
Who does itYouContractor, cabinet maker, installers
MessNone, keep cookingDemolition, dust, no kitchen
Old cabinetsStay right where they areTorn out and hauled away

You save about $12,700 to $23,700.

See the real-wood estimate
  • New cabinets with real wood-veneer fronts, including pantry, uppers and cabinet above the fridge, installed$9,000–$14,000
  • Removal, disposal, minor repairs and plumbing reconnection$1,000–$3,000
  • New panel-ready fridge with matching wood fronts$4,000–$8,000
  • Estimated total$14,000–$25,000

SurfaceWrap: 6 rolls of 4 × 8 ft at $223.68 each = $1,342.08, covering 192 sq ft for a 160 sq ft job.

Where to use it

Anywhere wood belongs.

Will it work on mine?
A kitchen with dark wood lower cabinets
Weekend project

Kitchens & appliances

Wrap cabinet doors, drawer fronts, the island and even appliance panels, and keep cooking the whole time.

A dining table finished in light oak SurfaceWrap vinyl wood
Great first project

Tables & furniture

Dining tables, desks, dressers and nightstands.

An interior door in a dark wood finish
Beginner

Interior doors

Flat painted doors to warm, grained wood, without taking them off the hinges.

A walk-in closet with wood built-ins
Intermediate

Built-ins & closets

Shelving, wardrobes, vanities and media walls in one matching finish.

A room with light oak walls and built-in shelving
Shown in Golden Oak

Accent walls

A paneled wood wall without a single board.

A ceiling in a warm wood finish
Bring a helper

Ceilings

A warm wood ceiling, overhead and over a weekend.

Surface check

Will it work on mine?

Choose what you're covering. We'll tell you if it's ready and what to do first.

Ready to wrap

Painted wood or MDF

    Not sure? Wrap a small test piece somewhere hidden first. It takes five minutes.

    The expensive look

    Looks like real wood.
    Costs a fraction.

    Real wood grain you can see and feel, on the cabinets you already have. Nobody will guess it came off a roll.

    See the kitchen
    Close-up of a table edge wrapped in oak vinyl wood, grain running over the corner BW021 wood grain up close
    Up close

    You can feel the grain.

    Run your hand across it. SurfaceWrap is vinyl with real wood texture pressed into it, so it looks and feels like the real thing. It's scrubbable, stain and water resistant, and fire retardant (ASTM certified), and it keeps your old cabinets out of the landfill.

    Texturedgrain you can feel
    Fire retardantASTM certified
    Scrubbablestain and water resistant
    Your weekend project starts here

    The expensive look, for much less.